Keynote Lectures

Plenary Session-I

28 December 2017 Thursday  11:00 AM - 01:00 PM

Venue :  Seminar Room (Heat Engine Lab.)

Chair: Prof. Dr. Md. Shamim Akhter (RUET, Bangladesh)

Co-Chair: Prof. Dr. Mihir Ranjan Halder (KUET, Bangladesh)

Page no.

KL-01

 Aerodynamics: A Tool to Achieve Glory in Speed Sports

Firoz Alam (RMIT University, Melbourne, Australia)

18-27

KL-02

Condition Monitoring of Rotating Machinery: A Recent Trend

Rajiv Tiwari (Indian Institute of Technology Guwahati, India)

28-31

Keynote Lectures

Plenary Session-II

29 December 2017 Friday  8:30 AM - 09:30 AM

Venue :  Seminar Room (Heat Engine Lab.)

Chair: Prof. Dr. Mohd. Rafiqul Alam Beg (RUET, Bangladesh)

Co-Chair: Prof. Dr. Rajiv Tiwari (IIT Guwahati, India)

Page no.

KL-03

Present and Future Research Trend in Electro Discharge Machining

Mohammad Yeakub Ali (International Islamic University Malaysia)

32-39

KL-04

Development of Creative and Innovation of Students

M.N.A. Hawlader (International Islamic University Malaysia, Malaysia)

Paper ID

Technical Session-I

Applied Mechanics

28 December Thursday 2:00 PM-4:00 PM

Venue: Seminar Room, Heat Engine Lab.

Chair: Dr. Ali Ahsan Talukder (Ex-Faculty, RUET, Bangladesh)

Co-chair: Prof. Dr. Md. Emdadul Hoque (RUET, Bangladesh)

Page no.

AM-23

Analysis of the Finite Element Solutions of Saint Venant torsion problem for a trapezoidal cross section

Md. Amirul Islam (Uttara University, Dhaka, Bangldesh), Md. Shajedul Karim (SUST, Bangladesh)

42

AM-95

Assessment of Surface Roughness Using LVDT: A Convenient and Inexpensive Way of Measuring Surface Irregularities

Sanjida Nasreen (RUET, Bangladesh), Md. Rokunuzzaman (RUET), Samarjith Biswas (RUET)

42

AM-118

Modeling and Analysis of Elastic Fields of Human Femur

M S. Parvej(BUET, Bangladesh), A.M. Afsar (BUET), T H.S. Rafi Ahmed (BUET), S M Shayak Ibna Faruqui (BUET)

43

AM-124

Design and construction of a two-wheel independent drive smart electric wheelchair for mobility impaired people

Md. Fahim Bhuiyan (IU, Bangladesh), Mohammad Rejwan Uddin (IU), Zaima Tasneem (IU), Khosru M Salim (IU)

43

AM-125

An autonomous detective robotic arm

Kazi Md. Ashraful Alam (KUET), Tasnim Rana (KUET), A A.S.M. Moniruzzaman Hashemy (KUET)

43

AM-131

Study and Design of Dexterous Prosthetic Hand for Upper Limb Amputee

Kazi Jubair (KUET, Bangladesh), Kazi Jamil Hossain (AIU, Bangladesh), Mir Ashraf Ali Ronok (KUET)

44

AM-157

Mode-I Failure Investigation of Eccentric Elliptical Hole Containing Crack with Varying Eccentricity and Crack Length

Oishwarya Bhowmik (BUET, Bangladesh), Turash Haque Pial (BUET), Moinuddin Shuvo (BUET) and Abdullah Al Aminb (Case Western Reserve University)

44

AM-161

A Proposal of Smart Home Automation System Based on Renewable Energy

A K Ehsanul Haque Mashuk (IU, Bangladesh), Pranti Tawheed (IU), Md. Khizir Al Zabir (IU), Ahsan Ul Kabir Shawon (IU), Mehdi Alam(IU), Md. Nasfikur R. Kha (IU)

45

AM-247

Improvement of Driving Mechanism of Rickshaw

Newton Roy(RUET, Bangladesh), Nikash kanti Nath (RUET), Md. Rokunuzzaman (RUET) and Miraj Bin Alam (RUET)

45

AM-270

Continuous Rotation Control of Robotic Arm using Slip Rings for Mars Rover

Rakibul Islam (RUET, Bangladesh), Md. Faridul Islam (RUET), Md. Rokunuzzaman (RUET)

46

AM-274

Transient Peak Reduction by Feedforward Control in Zero-compliance System with Displacement Cancellation Technique

Mhia Md. Zaglul Shahadat (RUET, Bangladesh), Nirendranath Mustafi (RUET), Md. Emdadul Hoque RUET), Takeshi Mizun (Saitama University, Japan)

46

AM-275

A Conceptual Design of Line Follower Pick-and-Place Robot for Industrial Purpose

Maruf Ar Rusafi (RUET, Bangladesh), Md Mashum Billal (RUET), Farjana Yasmin (RUET), Rukunuzzaman Khan (RUET), Sanjida Ferdousi (RUET) and S.M. Salauddin Iqbal (RUET)

47

AM-279

Performance Analysis of a Fabricated Distinct Voice Coil Motor

Mhia Md. Zaglul Shahadat (RUET, Bangladesh), Md. Golam Kibria (RUET), Md. Monnaf Ali (RUET)

47

AM-282

Development of an IOT based Delta Robot for Industrial Application

Shahajada Mahmudul Hasan (RUET, Bangladesh), Amit Roy (RUET) and Rifat Al Amin (RUET)

48

Paper ID

Technical Session-II

Energy Technology-I

28 December Thursday 2:00 PM-4:00 PM

Venue: Room No.: 204, Heat Engine Lab.

Chair: Prof. Dr. Mohd. Rafiqul Alam Beg (RUET, Bangladesh)

Co-chair: Prof. Dr. Jamal Uddin Ahamed (CUET, Bangladesh)

Page no.

ET-06

Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh

Md. Shazib Uddin (RUET, Bangladesh), Md. Saiful Islam (RUET), Md. Fazlur Rashid (RUET), Isahak Mohammad Habibulla (RUET), Nazmul Haque (RUET)

48

ET-27

Production of Biogas from Anaerobic Digestion of Biodegradable Waste Blends in Lab-scale Reactor

Sohail Ahmed (RUET, Bangladesh), Arun Sarker (RUET), Tasnuva Choudhury (RUET)

49

ET-33

Opportunities, Challenges and Future Developments of CNG (Compressed Natural Gas) Sector in Bangladesh

Syed Misbah Uddin (SUST, Bangladesh), M. Iqbal, Rezaul Islam Khan (SUST), Md. Nazmus Sakib (SUST)

49

ET-53

Waste Heat Thermal Storage System a Way to Renewable Energy

Tamal Chowdhury (CUET, Banglaedesh), Pranta Barua (CUET), Hemal Chowdhury (CUET), Sakib Ahmed (CUET), MD. Niamul Quader (CUET), Bodius Salam (CUET)

50

ET-60

Assessment of Biogas Resources for Rural Electrification in Bangladesh

M. S. Islam (RUET, Bangladesh), M. R. Islam (RUET), B. K. Das (RUET), Najmul Hoque (RUET)

50

ET-83

Design, Construction, and Performance Test of a Portable Solar Photovoltaic Water Pumping System for Irrigation and Household Water Supply

Sk. Suzauddin Yusuf (BAUST, Bangladesh), Md. Shariful Islam (Renata Ltd, Bangladesh), Robiul Islam Rubel (BAUST), Md. Abu Shaid Sujon (IUT, Bangladesh), Mohd. Rafiqul Alam Beg (RUET, Bangladesh)

51

ET-90

Generation of Hydrogen from Biomass Through Thermo-Chemical Fluidized Bed Gasification

Samitava Deb Nath (Lub-rref Ltd. Bangladesh), Md. Eyasin Arafat (BUET, Bangladesh)

51

ET-121

Extraction of Biofuel from Orange Peel and its Characterization

Asma-Ul-Husna (RUET, Bangladesh), Mona Ferajee (RUET), Kazi Farzana Akhtar (RUET)

52

ET-136

Electricity Generation from Treadmill Using Piezoelectric Transducer

Al-Barkat Mehedi (RUET, Bangladesh), Masuma Akter (RUET), Asma-Ul-Husna (RUET)

52

ET-140

Effect of Additives Biogas Generation Using Anaerobic digestion

A. Kafi (RUET, Bangladesh), Liza Afrin (RUET), M. Mourshed (RUET), N. Mustafi (RUET)

53

ET-146

Prospects of Underground Coal Gasification (UCG) Process in Khalaspir Coal Fields, NW, Bangladesh

Md. Lotifuzzaman (JUST, Bangladesh), Md. Kamrul Islam (JUST)

53

Paper ID

Technical Session-III

Material Science-I

28 December Thursday 2:00 PM-4:00 PM

Venue: Room No.: 203, Heat Engine Lab.

Chair: Prof. Dr. Abu Bokr Md Ismail (RU, Bangladesh)

Co-Chair: Prof. Dr. Md. Shamimur Rahman (RUET, Bangladesh)

Page no.

MS-19

Preparation and Characterization of Polymer Concrete from Unsaturated Polyester Resin Reinforced with Building Waste

Muhtasim Kader Mukit (NSTU, Noakhali, Bangladesh), Md. Abdul Gafur (NSTU), Muhammed Yusuf Miah (NSTU), Md. Kamruzzaman (NSTU)

90

MS-22

Effect of Saw Dust on the Physical and Mechanical Properties of China Clay Refractory

Abdullah Al Mahmood (RUET, Bangladesh), Mushfiqur Islam (RUET), N. Shahriar (RUET), M.S. Rahman, Tasmia Zaman(RUET), Tauhidul Islam Tushar (RUET)

90

MS-49

Characterization of Tensile Properties in Thermal Modified Cu-Ni Content Al-Si Hypoeutectic Alloy under Different Strain Rates

A. Hossain (Sylhet Gas Fields Limited, Sylhet, Bangladesh), F. Gulshan (BUET, Bangladesh), ASW. Kurny (BUET)

91

MS-50

Tribological (Wear) Properties of Cu/Ni/Cu-Ni Content Al-Si Hypoeutectic Alloys under Dry Sliding Condition

A. Hossain (Sylhet Gas Fields Ltd, Bangladesh), M. A. Gafur (BCSIR, Dhaka, Bangladesh), F. Gulshan (BUET, Bangladesh), ASW. Kurny (BUET)

91

MS-58

A comprehensive review of First Principle Study on Bismuth Ferrite

Md. Fatin Ishtiyaq (BUET, Bangladesh), Utpal Roy (BUET), Hasin Ishraq Tamim (BUET), Azmain Faek Islam (BUET), Ahmed Sharif (BUET)

92

MS-79

Effects of Defects on the Fracture Strength of Hexagonal Boron Nitride

Shahriar Muhammad Nahid (BUET, Bangladesh), Fakhrul Hasan Bhuiyan (BUET), Tawfiqur Rakib (BUET), Satyajit Mojumder (BUET)

92

MS-82

Approximation techniques of stress concentration factor of double notched plate

Md. Shafiul Ferdous (BAUST, Saidpur, Bangladesh), Md. Robiul Islam (BAUST), Md. Hasan Ali (BAUST), Md. Abu Shaid Sujon (BAUST), Sk. Suzauddin Yusuf (BAUST), Md. Rasel Sarkar (BAUST), Robiul Islam Rubel (BAUST)

93

MS-112

Study of Fiber Matrix Bonding Property Enhancement in Terms of Flexural Behavior and Macro Analysis of Fracture Behavior of Borassus flabellifer (Palmyra Palm) Fiber Reinforced Polymer Matrix Composites

Mohammad Tashfiul Amin Chowdhury (BUET, Bangladesh), Md. Aminul Islam (BUET)

93

MS-166

Sustainable Green Materials for Building Construction

Ashik Iqbal (KUET, Bangladesh), Faisal Jahangir Swapnil (KUET)

94

Paper ID

Technical Session-V

Industrial Engineering-I

28 December Thursday 4:15 PM - 6:30 PM

Venue: Room No.: 204, Heat Engine Lab.

Chair: Prof. Dr. Mohammad Yeakub Ali (IIUM, Malaysia)

Co-chair: Prof. Dr. Md. Mosharraf Hossain (RUET, Bangladesh)

Page no.

IE-28

Examining Critical Success Factors to Humanitarian Supply Chain of Bangladesh: An Interpretive Structural Modeling (ISM) Approach

Md. Abdul Moktadir (BUET, Bangladesh), Towfique Rahman (BUET), Syed Mithun Ali (BUET)

68

IE-63

Safety in Workplace and Its Effect on Labor Productivity: A Case Study for Pharmaceutical Industry

Md Shafiqul Islam (SUST, Bangladesh), Tanjila Islam (SUST)

68

IE-64

Developing Control Charts in a Manufacturing Industry and Improvement of Quality Using PDCA Cycle

Arif AlamTanjila Islam (SUST, Bangladesh), Md Shafiqul Islam (SUST)

69

IE-80

Productivity improvement in Solar Panel Manufacturing Company through In-Process Quality Inspection: A Case Study

Mohammad Ahnaf Sadat (BUET, bangladesh), Gazi Nazia Nur (BUET), Ahsan Akhtar Hasin (BUET)

69

IE-103

Measuring and Analyzing Job Stress and Fatigue among Workers and Its Impact on Employee Productivity in a Pharmaceutical Factory: A Case Study

Md Shafiqul Islam (SUST, Bangladesh), Md Mahraj Uddin (SUST), Md. Rabiul Hasan (SUST)

70

IE-123

Productivity Improvement of a Flow Line Layout Using Line Balancing Techniques

Md.Naime Hossain Bhuiyan (SUST, Bangladesh), Chowdhury Md. Luthfur Rahman (SUST), Md Ashraf Uddin (SUST)

70

IE-129

Cost Minimization and Environmental Impact Reduction on the Basis of Green Supply Chain Management Concept

Md. Saifur Rahman (BGMEA, Bangladesh), Md. Hasan Ali (BAUST, Bangladesh), A.S.M. Tariq Hoque (RFL Electronics Ltd, Bangladesh)

71

IE-154

Performance Assessment and Improvement of a Printing Press in Terms of Effectiveness and Efficiency

M.M.A. Khan (SUST, Bangladesh), S. Saha (SUST), A. M. Tousif (SUST), M. R. Islam (SUST), M. A. Islam (SUST)

71

Paper ID

Technical Session-IV

Fluid Mechanics

28 December Thursday 4:15 PM - 6:30 PM

Venue: Seminar Room, Heat Engine Lab.

Chair: Prof. Dr. Firoz Alam (RMIT, Australia)

Co-chair: Prof. Dr. Mohammad Rofiqul Islam (RUET, Bangladesh)

Page no.

FM-30

CFD Analysis of Shell and Tube Heat Exchanger with Different Baffle Orientation & Baffle Cut

Noor Afsar (KUET, Bangladesh), Dr. Mohammad Ilias Inam (KUET)

60

FM-75

Numerical Predictions of Calm Water Resistance of a Modern Surface Combatant

Doyal Kumar Sarker (BUET, Bangladesh), Md. Safwan Ahsanullah (BUET), Samiul Azam (BUET), Md. Mashiur Rahaman (BUET)

60

FM-76

Characteristics Analysis of Dual Bell Nozzle using Computational Fluid Dynamics

Yeasir Mohammad Akib (RUET, Bangladesh), Asif Kabir (BUET, Bnagladesh), Mahdi Hasan (CUET, Bangladesh)

61

FM-91

Numerical Study of Marine Propeller Performance

Parnab Saha (BUET, Bangladesh), Kaustuv Brohmachary (BUET), Dr. Md. Refayet Ullah (BUET)

61

FM-92

Boundary layer analysis along a stretching wedge surface in cylindrical coordinate

M. Ali (CUET, Bangladesh), M. A. Alim (BUET, Bangladesh), R. Nasrin (BUET)

62

FM-159

Study of Shockwave with Supersonic Compressible Flow over an Inclined Flat Plate

Syed Angkan Haidera (BUET, Bangladesh), Shadman Tahmidb (BUET)

62

FM-165

Observation of Unsteady Shock Behavior around a Biconvex Circular Arc Airfoil with Circular Cavities on It in a Channel

Zabir Mahmud (BUET, Bangladesh), Rifat Ibn Azad (BUET), Redowan Ahmed Niloy (BUET), Adibuzzaman Rahi (BUET), Shadman Tahmid (BUET)

63

FM-169

Numerical Analysis of Shock Oscillation around a Biconvex Circular Arc Airfoil by Incorporating a Bump on it in a Channel

Sujan Barua (BUET, Bangladesh), Sattajit Barua (BUET), Adibuzzaman Rahi (BUET), Redowan Ahmed Niloy (BUET), Shadman Tahmid (BUET)

63

FM-229

Design optimization & Numerical analysis of different bus geometry to reduce air drag co-efficient and fuel consumption

Md. Yasin Ali (KUET, Bangladesh), Shabnoor Mahmud Joty (KUET), Dr. Mohammad Ilias Inam (KUET)

64

FM-238

Design of a Microcontroller Operated PVC, uPVC and CPVC Pipe Internal Pressure Test Rig

MD. Samirul Islam (RUET, Bangladesh), Sadat Rafi (RUET), Md. Firojjaman (RUET), Rashidul Hasan (RUET), Md. Mujahid Ul Islam (RUET), Fazlur Rashid (RUET)

64

FM-244

A Numerical Study on the Fluid Structure Interaction of a Wind Turbine Blade

Sumaiya Tasnim (KUET, Bangladesh), Md. M. Islam (KUET), Shabnoor M. Joty (KUET), Zahir U. Ahmed (KUET)

65

FM-249

A Nonconventional Approach of Designing Airfoils

Rubiat Mustak (KUET, Bangladesh), Tanjim Ahmed (KUET)

65

FM-266

Design and Construction of a Jet Impingement Apparatus

Amitav Roy (KUET, Bangladesh), Pial Das (KUET), Md.Omar Faruk (KUET))

66

Paper ID

Technical Session-VI

Related Technology-I

28 December Thursday 4:15 PM - 6:30 PM

Venue: Room No.: 203, Heat Engine Lab.

Chair: Prof. Dr. Syed Abdul Mofiz (RUET, Bangladesh)

Co-Chair: Prof. Dr. Md. Shamsul Alam (RUET, Bangladesh)

Page no.

RT-13

Production of Activated Carbon from Charcoal Using Chemical Activation

Md. Masuduzzaman (CUET, Bangladesh)

88

RT-44

Design And Performance Test of An Automatic Irrigation System

Anupom Roy (KUET, Bangladesh), Riad Al Hasan Abir (KUET), A.S.M. Moniruzzaman Hashemy (KUET)

88

RT-46

A Proposal on Segregation of Road Side Wastes during Collection Period by Introducing an Innovative System

Sk. Md. Imdadul Islam (KUET, Bangladesh), Md. Nazmul Haque (KUET)

89

RT-57

Feasibility Study of CO2 Sequestration in the Potential Gas Fields of Bangladesh

S. M. Shamsul Hoque (CUET, Bangladesh), Md. Nahin Mahmood (CUET), Tareq Uz Zaman (Memorial University of Newfoundland, Canada)

89

RT-70

A proposal for an autonomous robotic model ship for continuous measurement of turbidity using wireless network system and GPS

Maqsood Mansur (BUET, Bangladesh), Preetom Kumar Sarker (BUET), Md. Safwan Ahsanullah (BUET), Md. Kamruzzaman Prodan (BUET), Kaustuv Brohmachary (BUET), Sakib Noor (BUET), Doyal Kumar Sarker (BUET)

90

RT-84

Design and Construction of Solar Water Purifier

Gazi Nazia Nur (BUET, Bnagladesh), Mohammad Ahnaf Sadat (BUET)

90

RT-100

Oil Spillage Problem and A Solution

Syed Tahmid Hussan (CUET, Bangladesh), MD Yeasin Arafat (CUET)

91

RT-101

Design and Construction of a DC Motor Driven Agitator for Lab-scale Work Agitation Purposes

Sohail Ahmed (RUET, Bangladesh), Arun Sarker (RUET), Md. Emdadul Hoque (RUET)

91

RT-142

Design, Construction and Performance Test of a Color Detective Device

Md. Abdullah Al Mamun (KUET, Bangladesh), Md. Hasan Ali (BAUST, Bangladesh), Md. Shafiul Ferdous (BAUST)

92

RT-170

Construction and Experimental Analysis between cylindrical type & canonical type silencer

Mihir Dutta (KUET, Bangladesh), Susmita Das Puja (KUET), Nusrat Sharmin (KUET)

92

RT-198

Analysis of Causes and Impact of Water Logging in Khulna City of Bangladesh

Md. Mehedi Hasan Khan (KUET, Bangladesh)

93

RT-207

Design and performance analysis of unmanned aerial vehicle (UAV) to deliver aid to the remote area

Rafi ur Rahman (MIST, Bangladesh), Muhammed Hasnain Kabir Nayeem (MIST), Mosarruf Hossain (MIST), Md. Roman Hossain Fazlah Rabby (MIST)

93

RT-222

Assessment of Sound Level at Different Locations of Rajshahi City

Pronob Das (RUET, Bangladesh), Zikrul Haque (RUET), Md. Shamim Akhter (RUET)

94

Paper ID

Technical Session-VII

Energy Technology-II

29 December Friday 10:50 AM-12:30 PM

Venue: Seminar Room, Heat Engine Lab.

Chair: Prof. Dr. Mohd. Rafiqul Alam Beg (RUET, Bangladesh)

Co-Chair: Prof. Dr. Mihir Ranjan Halder (KUET, Bangladesh)

Page no.

ET-182

Characterization of Upgraded Pyrolytic Oil by Using ZSM-5 Catalyst in Thermal Pyrolysis of Scrap Tire

Md. Shameem Hossain (KUET, Bangladesh), Adnan Abedeen (KUET), Md. Moniruzzaman (BCSIR, Bangladesh), Juwel Hosen (BCSIR)

55

ET-253

Solar Based Plugged-in Hybrid Engine Driven rickshaw (Auto-Rickshaw) & its Feasibility Analysis for Bangladesh

AvijitMallik (RUET, Bangladesh), Md. Arman Arefin (RUET), Fazlur Rashid (RUET), Md. Asfaquzzaman (RUET)

56

ET-263

Performance Analysis of a Solar Powered Adsorption Cooling System

Sai Yagnamurthy (IIT, Delhi, India), Dibakar Rakshit (IIT), Sanjeev Jain (IIT)

56

ET-264

Designing of an Off Grid Photovoltaic System for a Residential Building

Md. Raquibul Hasan (PUST, Bangladesh), Md. Asaduzzaman Shobug (PUST)

57

ET-273

Liquid Fuel Production by Co-Pyrolysis of Polythene and Sawdust

M. S. Haque (RUET, Bangladesh), M. K. Hasan (RUET), J. Ferdous (RUET), M. S. Hossain (RUET), M. R. Islam (RUET), H. Haniu (KIT, Japan)

57

ET-277

Solar Energy Resources and Related Technologies Practice in Bangladesh

M. S. Islam (RUET, Bangladesh), M. R. Islam (RUET), Nurul Huda (RUET), Rakibul Islam (RUET), Shohag Hossain (RUET)

58

ET-281

Prospect of rural electrification through biogas in Bangladesh-design & feasibility study of biogas based electricity facility of a poultry farm

Md. Nurul Islam (RUET, Bangladesh), S. M. Najmul Hoque (RUET), Soumya Mandal (RUET), Abir Hasan (RUET), Md. Rafsan Nahian (RUET)

58

Paper ID

Technical Session-VIII

Industrial Engineering

29 December Friday 10:50 AM-12:30 PM

Venue: Room No.: 204, Heat Engine Lab.

Chair: Prof. Dr. Rajiv Tiwari (IIT Guwahati, India)

Co-chair: Prof. Dr. Md. Emdadul Hoque (RUET, Bangladesh)

Page no.

IE-181

The Significance of Green Technology in the Textile Industries of Bangladesh

N.C Roy (DUET, Bangladesh), Dr. Md. Showkat Osman (DUET), Shahab Uddin (DUET), M. Mazumder (DUET), T. Islam (DUET), S. J Roy (DU, Bangladesh)

72

IR-185

Demand Forecasting Techniques Applicable to the Supplier of Industrial Products in Bangladesh (An Exploratory Study)

M. A. Islam (SUST, Bangladesh), M. M. A. Khan (SUST), S.K. Nahar (SUST)

72

IE-213

Android-based pick and place robotic arm with object recognition

Zaidur Rahman (KUET), Prem Agarwala (KUET), Imtiazul Haque (KUET), Al Mohaiminul Alam Mehedie (KUET)

73

IE-221

Weight Optimization of Helical Spring Using Genetic Algorithm

Shabnoor Mahmud Joty (KUET, Bangladesh), Md. Yasin Ali (KUET)

73

IE-225

Improvement of Productivity through Manipulating Fabrication Layout in Sewing Department of a Footwear Industry

Md. Nazmul saif (KUET, Bangladesh), Md. Alif Hossain (KUET), Adhir Chandra Paul (KUET)

73

IE-243

Understanding the difficulties of implementing TQM in garment sector: A case study of some RMG industries in Bangladesh

Subrata Talapatra (KUET, Bangladesh), Md. Kutub Uddin (KUET)

74

IE-268

Improving OEE of a Garment Factory by Implementing TPM Approach

Sajib Saha (JUST, Bangladesh), Sadi Mohammad Akash (JUST), Tarun Kumer Biswas (JUST)

74

IE-278

How Mobile Phone Impacts on Engineering Students’ Academic Performance: A Case Study

Md. Asadujjaman (RUET, Bangladesh), Jamshed Uddin (RUET), G.H.M. Jilan (RUET), Sonia Akhter (RUET)

75

Paper ID

Technical Session-IX

Thermal Engineering

29 December Friday 10:50 AM-12:30 PM

Venue: Room No.: 203, Heat Engine Lab.

Chair: Prof. Dr. M.N.A. Hawlader (IIUM, Malaysia)

Co-chair: Prof. Dr. Nirendra Nath Mustafi (RUET, Bangladesh)

Page no.

TE-25

Experimental Investigation on Micro Heat Pipes (MHP) of Different Lengths

Al-Basir (IUT, Bangladesh), Mohammed Shahed Hossain (DU, Bangladesh), Rajib Sarkar Rajan (UAP, Bangladesh), Md. Shahrier Hakim (University of Greenwich, UK), Md. Abdur Razzaq Akhanda (IUT)

100

TE-48

Water Based Ferrofluid and Nanofluid Mixed Convective Flow through a Square Channel: Effect of Magnetic Induction

Mohammad Mokaddes Ali (MBSTU, Bangladesh), M.A. Alim (BUET, Bangladesh), R. Nasrin (University of Malaya, Malaysia)

100

TE-85

Study of power consumption characteristics of LPG and R134a in a vapor compression refrigeration system

Md. Abu Shaid Sujon (IUT, Bangladesh), Rakibul Hossain Ahmed (Walton Ltd, Bnagladesh), Dr. A.K.M. Sadrul Islam (IUT), Sk. Suzauddin Yusuf (BAUST, Bangladesh)

101

TE-152

Prospects of Solar Powered Air Conditioning Systems in Bangladesh and Comparative Analysis with Conventional Systems

Sami Ahbab Chowdhury (RUET, Bangladesh), Shaikh Sumit Noor (RUET), Oishwarjya Ferdous (RUET), Md. Emdadul Hoque (RUET)

101

TE-209

MHD Free Convection and Mass Transfer Flow over a Vertical Porous Plate in Presence of Ion-slip Current

Md. Delowar Hossain (CUET, Bangladesh), Md. Mahmud Alam (KU, Bangladesh), Syed Mainur Rahman (CUET)

102

TE-262

A Comparative Study and Parametric Analysis of Phase Change Materials Utilization for Interior Heat Gain Reduction

Pranaynil Saikia (IIT Delhi, INDIA), Dibakar Rakshit (IIT, Delhi)

102

TE-280

Feasibility of utilizing waste heat in drying of plant-based food materials

M. H. Masud (RUET, Bangladesh), Mohammad U.H. Joardder (RUET), Md. Tariqul Islam (RUET), Md. Munthakimoon Hasan (RUET), Md. Muntasir Ahmed (RUET)

103

Paper ID

Technical Session-X

Material Science-II

29 December Friday 2:30 PM-4:15 PM

Venue: Room No.: 204, Heat Engine Lab.

Chair: Prof. Dr. M Mamun Ur Rashid Khandkar (RU, Bangladesh)

Co-chair: Prof. Dr. Md. Mahmud Sazzad (RUET, Bangladesh)

Page no.

MS-177

Thermal Resistance Approach to Analyze Temperature Distribution in Hollow Cylinders Made of Functionally Graded Material (FGM): Under Dirichlet Boundary Condition

S M Shayak Ibna Faruqui (BUET, Bangladesh), Abul Al Arabi (BUET), M. S Parvej (BUET)

81

MS-184

Measurement of Small Strain Stiffness Parameters of Granular Materials by DEM

Md. Mahmud Sazzad (RUET, Bangladesh), Md. Shariful Islam (RUET), Md. Sumon Hossain (RUET)

82

MS-193

Synthesis and Experimental Investigation of PALF Twill Fabric Reinforced Polyester Biocomposites

Subrata Chandra Das (PTexEC, Pabna, Bangladesh), Debasree Paul (KYAU, Sirajgonj, Bangladesh), Md. Abdullah Al Mamun (MBSTU, Bangladesh), Bidhan Kumer Mitro (MBSTU), M. Tauhidul Islam (KYAU), Mubarak Ahmad Khan (BAEC, Bangladesh)

82

MS-210

Effect of Aspect Ratio on the Micro-Scale Responses of Granular Materials

Md. Mahmud Sazzad (RUET, Bangladesh), Saleha Akter Poly (RUET), Nazia Nowshin Sudipta (RUET)

83

MS-231

Unusually High Thermoelectric Figure of Merit in Monocrystalline Metallic Vanadium Dioxide Nanobeams and Its Potential as a Thermoelectric Material

MD. Samirul Islam (RUET, Bangladesh), Md. Mujahid Ul Islam (RUET), Md. Firojjaman (RUET), Tauhidur Rahman (RUET), Sadat Rafi (RUET)

83

MS-239

Design and Simulation of a Graphene Based Thermoelectric Device

MD. Samirul Islam (RUET, Bangladesh), Md. Nahid Hossan (RUET), Md. Najmul Huda Bijoy (RUET), Tauhidur Rahman (RUET), Md. Mujahid Ul Islam (RUET)

84

MS-260

Investigation of Different Mechanical Properties of Commonly Available Papers

M. W. Akram (RUET, Bangladesh), M. W. Islam (RUET), S. K. Choudhury (RUET)

84

MS-269

Influences of Various Ceramic Oxides on Physical and Mechanical Properties of Zirconia Toughened Alumina (ZTA): A Review

Md. Wahedul Islam (RUET, Bangladesh), Md. Bakhtier khalzi (RUET), Md. Suzauddin (RUET), Nirendra Nath Mustaf (RUET)

85

MS-272

Comparison of Mechanical Properties of Induction Furnace Steel Slag and Electric Arc Furnace Steel Slag as a Replacement of Coarse Aggregate in Construction Materials

Riad Morshed Rezaulm (BUET, Bangladesh), Raihan Atahar (BUET), Tahmeed Bin Tasnim (BUET), ASW Kurny (BUET), Rowshan Momtaz (BUET), Fahmida Gulshan (BUET)

85

MS-276

Influence of Aspect Ratio of Granular Materials on the MechanicalBehavior during Cyclic Loading by DEM

Md. Mahmud Sazzad (RUET, Bangladesh), Tasnim Rahat (RUET)

86

Paper ID

Technical Session-XI

Related Technology-II

29 December Friday 2:30 PM-4:15 PM

Venue: Room No.: 203, Heat Engine Lab.

Chair: Prof. Dr. M. Shahidur Rahman (RU, Bangladesh)

Co-chair: Prof. Dr. Md. Rafiqul Islam Sheikh (RUET, Bangladesh)

Page no.

RT-226

A Study on the Correlation among Different Foot Parameters of Bangladeshi Male

Adhir Chandra Paul (KUET, Bangladesh), SK. Ahasanuzzaman (KUET), Anik Alam (KUET)

94

RT-237

Design and Performance Study of a Circular Flow Channel Solar Water Heater

Md. Mujahid Ul Islam (RUET, Bangladesh), Dr. M R I Sarker (RUET), Md. Moshiur Rashid (RUET), Md. Firojjaman (RUET), MD. Samirul Islam (RUET)

95

RT-248

Welding joint evaluation of mild steel samples for varying current and voltage to reduce the defect using non destructive testing

Md. Emdadul Hoque (RUET, Bangladesh), Md. Jabid Hasan (RUET), Md. Kamrul Hasan (RUET)

95

RT-250

Chromium Removal from the Tannery Wastewater Using Coir Pith Charcoal

Md. Abul Hashem (KUET, Bangladesh), Aziza Ahsan (KUET), Md. Hasibur Rahman Sheikh (KUET), Syeda Anika Bushra (KUET), Alvi Rownok (KUET)

96

RT-252

Chromium Removal from the Wastewater Equipped Artocarpus heterophyllus Bark Charcoal

Md. Abul Hashem (KUET, Bangladesh), Mehedi Hasan (KUET), Md. Abdul Momen (KUET), Shoeb Rahman (KUET)

96

RT-255

Development of Thermo Acoustic Device for Cooling Effect in Machining Process

Anayet U Patwari (IUT, Bangladesh), Mohammad Ahsan Habib (IUT), Md. Saiful Islam (IUT), Md. Sayeed Ul Hasan (IUT)

97

RT-256

Improvement of Surface Profile of Different Materials by Hot Air in Turning Process

Anayet U Patwari (IUT, Bangladesh), Mohammad Ahsan Habib (IUT), Md. Firoz Mahmud (IUT), Md. Minhazul Islam (IUT)

97

RT-267

Feasibility Study of a Solar Charging Station for Charging Auto-rickshaw in Bangladesh

Md. Shazib Uddin (RUET, Bangladesh), Md. Saiful Islam (RUET), A. Z. M. Waliur Rahman (RUET), Sumon Kumar Mondol (RUET)

98

RT-271

Characterization of Waste Lithium ion Batteries in the Process of Recovery of Value Materials

Md. Imran Noor (BUET, Bangladesh), ASW Kurny (BUET), Md. Rakibul Qadir (BCSIR, Bangladesh), M. A. Gafur (BCSIR), Fahmida Gulshan (BUET)

98